2350 Old Farmington Road
Fayetteville, AR 72701
(479) 444-3058
http://rtc.nwacc.edu
The NorthWest Arkansas Community College’s Regional Technology Center (RTC), formerly West Campus Technical Center, continues the West Campus tradition and mission by providing high quality career and technical programs to secondary students from Northwest Arkansas. Important programming changes for the RTC under NWACC sponsorship include:
• The RTC will no longer grant high school diplomas. Students will earn diplomas from their “sending” high schools.
The RTC uses a 4x4 block schedule. Bus transportation is provided forFayetteville students throughout the school day and for area school students morning, noon and afternoon. There will be no free and reduced lunch program at the RTC. Students must access the lunch program at their home school or be responsible for their own lunch. NWACC’s Regional Technology Center provides tuition for students in technical programs of study with no direct charges to students or their families.
Program and course descriptions for the RTC and the concurrent academic courses follow below. An RTC student can graduate with a high school diploma (conferred by the sending high school), industry-recognized technical certification/s, and an NWACC Associate of Applied Science degree or significant hours toward one.
NWACC Regional Technology Center Enrollment Procedures:
• Visit with local high school counselor to review RTC career and technical programs or concurrent college class offerings.
• Download (from http://rtc.nwacc.edu), print, and complete enrollment form and referral forms, and ask local counselor to fax completed forms to RTC Guidance Office, 479-444-3017.
• Download and print Enrollment List. Call 479-444-3060, ext. 112, to schedule appointment with RTC Counselor. Bring Enrollment List items to appointment.
• Students will receive formal NWACC Regional Technology Center acceptance letter after completing all enrollment forms and procedures listed above.
PARTNERSHIP SCHOOLS
Bentonville
Gravette
Prairie Grove
Decatur
Greenland
Rogers
Elkins
Huntsville
Siloam Springs
Farmington
Lincoln
Springdale
Fayetteville
Pea Ridge
West Fork
Gentry
By Arkansas law, all high school students must attend school for a minimum of 350 minutes (5 hours; 50 minutes) a day, 30 of which can be used to travel to and from the RTC. The RTC’s “early college” model provides meaningful learning opportunities to gain technical skills and college credit at the same time-in a challenging, hands-on environment.
PROGRAMS OF STUDY
Architectural and Computer Aided Drafting
Auto Collision Technology
Aviation Maintenance Technology*
Building Construction Technology
Business Education
Child Care and Guidance Management Services*
Computer Repair/Networking*
Cosmetology*
Criminal Justice*
Electrical Apprenticeship (pending state approval)
Food Production Management Service/Culinary Arts*
Geographic Information Systems
Graphic Communications
Lodging Management*
Medical Professions/Certified Nursing Assistant (CNA)*
Medical Professions/Dental Assisting*
Pre-Engineering
Welding*
*Indicates programs for which selected industry certifications are available.
ARCHITECTURAL AND COMPUTER AIDED DRAFTING
Program Overview
This program presents drafting and design concepts together with communication and graphics skills used in architecture, engineering, construction, and manufacturing. It includes course sequences focusing on career-development skills as well as the duties and tasks performed by professionals in drafting and design occupations. Career opportunities include a wide variety of options in engineering, architecture, construction management and construction scheduling.
COURSE OFFERINGS:
Drafting/Design
This full-year course includes mechanical drafting covering multiview drawings, dimensioning, sections, auxiliary views, and pictorials in the first semester. Most work is completed in AutoCAD. The second half of the course includes residential drafting including floor plans, foundation plans, elevations, sections and pictorial drawing, and model-building.
Architectural - CAD-I
This course extends the first year residential drafting course to familiarize students with “Revit” and “Chief Architect” protocols to create models in AutoCAD.
Architectural - CAD-II
Commercial drafting is the focus of this course as students create a complete set of plans, learn use codes, and create models.
Engineering - CAD-I
This course introduces more complicated aspects of mechanical design including threads, detail drawings, working drawings, geometric design, tolerances, product design, and familiarity with design specifications and requirements.
Engineering - CAD-I
This course provides more depth in mechanical and civil design geared to individual student-based projects through which students refine their skills and increase their knowledge using CAD.
AUTO COLLISION TECHNOLOGY
Program Overview
Today’s high tech vehicles require competent collision repair from well-trained professionals. The auto collision repair program provides the basic knowledge to repair damaged vehicles through a typical cycle of towing, estimating damage, metal straightening, filling, masking, painting, detailing, and delivering to the customer. Through job shadowing visits to auto repair businesses, students observe daily repair methods and techniques and gain real-world insight into professional operations and career opportunities. Career opportunities include metalworking technician, painter, estimator, bookkeeper, parts sales, and paint company representative, among others.
COURSE OFFERINGS:
Non-Structural Analysis and Repair
Students restore damaged auto bodies and parts to repair dents, weld, work with plastic materials, use wrenches and cutting torches, and bolt or weld replacements into position. Students file, grind, and sand repaired surfaces using power and hand tools, then refinish repaired surfaces by painting and sanding them
Structural Analysis and Repair
Students inspect, measure, and repair automobile bodies using manufacturer recommended methods and techniques. ASE and I-CAR tasks and procedures are promoted and incorporated throughout training. Plastic body part repair, painting and refinishing follow manufacturer recommendations. Students gain entry-level skills in job safety, basic application techniques, tools and equipment usage.
AVIATION MAINTENANCE TECHNOLOGY
Program Overview
The Aviation Maintenance Technician (AMT) program prepares students for work in aviation and other industrial maintenance fields. Training includes welding, electrical, sheet metal, precision measuring, composite, hydraulics, reciprocating and turbine engines, ignition systems, fuels systems, fuel metering systems, aerodynamics, math, physics, and other technical opportunities. Career opportunities with area and regional employers include airframe, jet engine, airframe structure, jet engine repair, aircraft fabrication, non-destructive inspection, and aircraft restoration specialists. Students can earn Federal Aviation Administration Certification after as little as 16 months of training with potential earnings between $26,000 and $33,000 in the first year.
COURSE OFFERINGS:
The Arkansas Aviation Technologies Center Aviation Maintenance Technician Program is comprised of three main sections:
General Aviation and Basic Subjects 462 clock hours
Airframe Subjects 750 clock hours
Powerplant Subjects 750 clock hours
This full-time, comprehensive instructional program leads to the FAA’s Aircraft Mechanic Airframe and Powerplant (A&P) Mechanic Certificate, which is required for employment in the United States and many other countries.
FAA certification requires that students be at least 18 years old by the end of the program and before certification. All classes are taught in English and students must be able to read, write, speak and understand the English language. The full time AMT program runs approximately 16 months, 5 days a week, for a total of 1962 clock hours, and covers all technology areas pertaining to aircraft structures, power plants and systems.
BUILDING CONSTRUCTION TECHNOLOGY
Program Overview
This program produces graduates who demonstrate technical and employability skills in bid research, cost estimation, and specific construction and carpentry expertise. Job shadowing visits to construction sites and participation in apprenticeship programs provide real life exposure to the industry. Career opportunities include carpenter, roofer, electrician, brick mason, machine operator, concrete mason, painter, plumber, plasterer, surveyor, cost estimator, engineer, interior designer, architect, and many others.
COURSE OFFERINGS:
Construction Fundamentals
This course introduces students to various building trades, tools, terminology, materials and general safety practices in the construction process.
Carpentry
This course requires enables to demonstrate mastery of knowledge-based and practical construction skills in understanding building codes, construction plans, specifications, scale drawings, and sequential scheduling and cost estimating, including basic carpentry skills required in residential framing.
Advanced Courses
Successful completers of the Construction Fundamentals and Carpentry courses learn advanced skills in carpentry, basic wiring, plumbing, masonry and/or involvement in the Construction Apprenticeship Program.
BUSINESS EDUCATION
Program Overview
The program introduces and explains computer software and applications widely used in business and industry. Students explore the workplace atmosphere concentrating on cutting-edge technology and mastering real-world business computer skills applicable to virtually every career. Career opportunities include web page designer, receptionist, administrative assistant, office management, data entry clerk, telemarketing, layout designer, media editor, and many more.
COURSE OFFERINGS:
Multimedia
Students use multimedia to merge text and graphics, and to edit and dub video and sound.
Desktop Publishing I
This course combines multiple facets of the microcomputer with page design software, enabling students to produce professional quality materials.
Computer Applications I, II, III
These courses provide the fundamental computer skills needed in high school and in virtually all jobs. Students learn the fundamental word processing skills to create and edit with the most widely used software and the most commonly used features of a word processor. The fundamentals of using scanners, graphics, and Word Art are applied to documents. Students apply Internet searching and citation skills to a simple PowerPoint presentation. Students create and edit spreadsheets using basic formulas and functions, and they generate simple graphs or charts.
Workplace Readiness
This course prepares all vocational students to enter the work force with appropriate teamwork, problem solving, and self-management skills.
CHILDCARE AND GUIDANCE MANAGEMENT SERVICES
Program Overview
Quality care is crucial to every child’s physical, intellectual, emotional and social development. Child development expertise is critical to professionals in the field and to parents. Students learn child development, parenting skills, human relationships, child care management and family dynamics through hands-on experience and on-site internships at the RTC Child Development Center. Certifications and portfolio development complete the training and prepare students for employment or further study. Pediatric rotations in hands-on environments prepare students to work with children between the ages of 4 weeks and 36 months. Career opportunities include child care management, personnel, teaching, industry, research and consulting, and a variety of human services for children.
COURSE OFFERINGS:
Human Relations
Students develop skills needed to build and maintain successful relationships in the home, community and workplace.
Leadership and Service Learning
This course emphasizes volunteerism, professionalism, and leadership skills in the development of personal qualities.
Managing Resources
This non-laboratory course assists students to understand available resources for individuals and families and ways to manage these resources to meet needs and goals.
Family Dynamics
This course examines the role of the family in helping individuals develop to theirhighest potential, strengthen the community, and address concerns of a global society.
Child Development
Students develop the skills to guide the physical, intellectual, and emotional and social development in children.
Parenting
Experiences in parenting enable students to develop an understanding of parenting processes and skills.
Child Care and Guidance Management and Services
Student experiences provide information and know-how in childcare and guidance management and services.
COMPUTER REPAIR/NETWORKING TECHNOLOGY
Program Overview
Because the computer is a workplace constant, professional opportunities abound for computer systems installation, repair and maintenance. Students construct, troubleshoot, service and repair computer systems, related components and software, and install and maintain local area networks. The program subscribes to the ExplorNet commitment for providing cutting edge techniques in computer diagnostics, troubleshooting, configuration and repair. Through job shadowing, students gain real-world experience in computer related jobs. Career opportunities include help desk, PC and network support technician, network system and server administrator, telecom engineer, wiring technician, web developer, and government and software specialist.
COURSE OFFERINGS:
Computer Diagnostics
This introduction to computer repair includes basic and advanced hardware identification and configuration, troubleshooting techniques, troubleshooting tools, shop safety and an introduction the Windows, Linux, and Macintosh operating systems. Completion of this course is the first step towards obtaining CompTIA’s A+ certification.
Computer Operating Systems
This is an in-depth study of all software-related issues in computer repair and networking, basic and advanced operating system setup and configuration, including Windows and Linux. Custom setup and configuration study leads to advanced diagnostic and troubleshooting skills, including customer service and shop setup, customer satisfaction, digital photography, web design, and further preparation for obtaining the CompTIA’s A+ certification.
Networking
Computer networking setup, configuration and maintenance with Microsoft, Linux, and Novell includes theory (such as the OSI model) and hands-on labs featuring both actual setups and simulations. This course prepares students to pursue the CompTIA’s Net+ certification.
COSMETOLOGY
Program Overview
Cosmetology offers profitable career opportunities for those trained in personal grooming. Students master the theoretical and practical knowledge to best serve their clients, and clinical experience allows students to apply their theoretical knowledge. After successfully completing a set number of courses and documented clinical hours, students can work with the public under the direct supervision of licensed instructors. Cosmetology students must pass a state board licensing exam after completing all educational requirements and prior to professional employment. Career opportunities include hair styling, manicuring, beauty supply salesperson and demonstrator, shop manager, field supervisor, nail technician, color specialist, hair analyst, make-up artist, and manufacturer and sales representative.
COURSE OFFERINGS:
Hygiene and Sanitation 80 clock hours
Related Science 120 clock hours
Hairdressing 1,000 clock hours
Manicuring 100 clock hours
Cosmetic Therapy 100 clock hours
Salesmanship and Shop Management 100 clock hours
CRIMINAL JUSTICE
Program Overview
This fast-growing profession offers employment opportunities concentrated in law enforcement, corrections, and private security. Students gain an overview law enforcement and employment options. Through job shadowing, students work with local law enforcement officers and meet officers from state and federal agencies. College bound students can earn college credits through an articulation agreement with NWACC. Career opportunities include crime scene technician and photographer, evidence/property and fingerprint technician, corrections officer, private secretary, emergency telecommunications, police, state police and deputy sheriff officer, prosecuting attorney and many others.
COURSE OFFERINGS:
Courses prepare students to seek employment in law enforcement or private security upon graduation from high school. For college bound students, the RTC experience complements the transition to two-year or four-year degree programs. Through an articulation agreement with NWACC, students can earn three college hours while enrolled in the RTC program. Students completing three of four RTC courses are considered concentrators in that area while students completing all four courses qualify as completers.
Introduction to Criminal Justice
This required core course presents an overview of the criminal justice system emphasizing search and seizure, arrests, court procedures, crime prevention, criminal justice careers, study of particular crimes, emergency response, traffic control, patrol procedures, and crime scene investigation
Law Enforcement I
Students learn safety and the care and use of tools and equipment in police work. Additional topics include the use of force, physical fitness, the elements of a crime, the use of force continuum, and first aid skills. A separate seven-week program in emergency communications offers national certification upon completion of all requirements.
Law Enforcement II
This advanced course covers illegal drugs, crimes against children, search warrants, arrest warrants, search and seizure laws, and the constitutional rights of persons placed under arrest. The course stresses writing skills.
Criminal Law
This advanced course requires students to obtain and execute search warrants, explain conditions for conducting searches and seizures, the elements of probable cause, search techniques, and juvenile law. Students learn to gather necessary information from the start of a criminal investigation until an arrest is made.
FOOD PRODUCTION MANAGEMENT SERVICE/CULINARY ARTS
Program Overview
The food service industry offers fast-paced, hands-on, people-centered career opportunities. Americans spend $350 billion annually in the nation’s 815,000 eating establishments which are constantly seeking experienced cooks, chefs and managers. This program offers a firm foundation in food preparation, customer service, food and beverage service, and management skills. Students may earn nationally recognized certification and participate in state and national culinary and management competitions. Career opportunities include restaurant manager, chef/executive chef, owner/entrepreneur, server, host/hostess, teacher, concessionaire, grocery store/deli manager, event planner, caterer, banquet manager, hotel food and beverage manager, food supplier/distributor, food scientist, institutional menu planner, food journalist and food stylist, among others.
COURSE OFFERINGS:
Introduction to Culinary Arts - (Grade level 10-12)
This semester course introduces students to the culinary arts profession emphasizing development of basic competencies using menus and recipes, standardization and kitchen procedures. Students learn skills for employability, customer relations, menu planning, recipe use, weights and measures, conversions, budgeting, safety and sanitation, and organizing for efficiency and lab procedures.
Culinary Arts 1 - (Grade level 10-12)
This in-depth study of the professional kitchen and culinary applications is a prerequisite to Culinary Arts II.
Culinary Arts II - (Grade level 10-12)
This course is an advanced study of culinary arts applications, service and presentation.
ProStart I - (Grade Level 11-12) - Certificate Course
ProStart II - (Grade Level 11-12) - Certificate Course
This two-year industry-based course prepares students for careers in the restaurant and food service industry. Students may earn nationally recognized certification after completing the classroom curriculum, documenting 400 paid-mentored work hours, and passing the Year 1 and Year 2 National Exams. Credit can be articulated with post secondary hospitality programs around the country. Students earning a certificate are eligible for a $2,000 scholarship from the National Restaurant Association Educational Foundation.
YOUTH ELECTRICAL APPRENTICEHSIP PROGRAM
(pending state approval)
Program Overview
This program combines classroom and performance-based instruction to ensure a quality introduction to the electrical trade. It provides students a jump start to careers as electricians. The high-demand skills acquired will ensure job security with qualifications to work as electricians and the seeds for some to start their own businesses. Career opportunities include potential employment with over fifty companies in NW Arkansas as residential, commercial and industrial electricians. Apprentices can expect wages usually reserved for college graduates. After students complete the program and obtain their Journeyman License, much higher wages are available.
COURSE OFFERINGS:
Electrical Applications I
Electrical Applications Lab I
Electrical Applications II
Electrical Applications Lab II
Topics covered during the two-year program include introduction to the electrical trade, work ethics, introduction to the national electrical code, introduction to electrical equipment, safety, basic math, theory, OHM’s Law, Chapter 1 & Tables NEC, Chapters 2&3 NEC, branch circuit calculations, service & ampacity calculations, cooking equipment calculations, and performance-based practical applications. Completion of this program will be credited toward one year of the adult apprenticeship program.
GEOGRAPHIC INFORMATION SYSTEMS
Program Overview
Geographic Information Systems (GIS) and Remote Sensing (RS) map data provides a visual understanding of geographic locations. Spatial Technology and Remote Sensing (STARS) supports continued instruction in GIS and RS technology. A mapping system of computer software, hardware, data and personnel help manipulate, analyze, and present information tied to a spatial location -- introducing students to both academic study and applied instruction. The GIS program prepares students to work in a wide variety of jobs involving data collection and decision making. Job shadowing and industry tours with land surveyors and city planners introduce students to using GIS technology to develop projects in many environments. Career opportunities include GIS mapper, GIS technician, cartographer, and many others.
COURSE OFFERINGS:
Introduction to GIS
GIS and Remote Sensing
Spatial Technology and Remote Sensing
Spatial Projects and Community Exchange
GRAPHIC COMMUNICATIONS
Program Overview
Graphic communications directly affect everyday lives. The graphic communications program prepares students for multiple careers within the field. Students gain an overview of the printing industry, safety and first aid, orientation, measurements, art and copy, electronic imaging, reproduction photography/screen printing, image assembly and plate making. Job shadowing visits to area graphic communication operations allow students to observe real-world applications of what they have learned and practiced. Career opportunities include graphic designer/web-page designer, illustrator prepress operator, digital imaging plate maker, screen printing press operator, bindery technician, finishing technician, owner/entrepreneur printing systems, and salesperson manager.
COURSE OFFERINGS:
Fundamentals of Graphic Communications/
Beginning-level Printing
Students learn the history of printing and become proficient in type composition and presswork as they develop an ability to judge the quality of print materials and an appreciation for good printing.
Reproduction Photography
Building on entry level skills and knowledge, this course examines reproduction photography/screen printing through progressive darkroom exercises (line photography and halftone photography) and camera and screen printing operations. Students learn film exposure and processing techniques, materials, operations, safety, screen printing vocabulary, tools used in screen printing and constructing a screen capable of producing an image.
Offset Press Operations
This course provides an overview of offset duplicator operation through tasks and simulations, including safety practices, duplicator make-ready, color copier, black/white copier, press operations (1250 press, 1450 press, and 1960 press), maintenance and cleanup, and offset plate making, exposure and development, procedures and methods.
Electronic Imaging
This course covers basic typography, layout, desktop publishing, and operating computers such as power Macintosh and Dell.
Finishing and Binding
A series of related tasks and simulations build entry level skills using paper cutters, drills, staplers, comb binding, perforating, adhesive binding, folding equipment, paper identification and safety procedures.
Image Assembly and Plate making
This course covers basic image assembly and construction and plate-making techniques, including assembly construction techniques for single and multi-color work, step and repeat, imposition layout and daylight contacting. Learning activities include mechanics of layout, stripping equipment and tools, and electronic imposition and stripping.
LODGING MANAGEMENT
Program Overview
The Lodging Management Program (LMP) prepares students for exciting lodging industry careers through fundamentals of front desk operations, housekeeping, leadership and management, marketing and sales, and food and beverage service. The program offers nationally recognized certification and participation in state and national competitions. Career opportunities include general manager, rooms division manager, controller, food and beverage manager, executive housekeeper, front office manager, concierge, banquet manager, human resources manager, marketing manager, chief engineer, wine steward, baker, executive chef, front desk agent, reservations agent, bell captain, food server, bell person, housekeeper, teacher, and many others.
COURSE OFFERINGS:
Housing and Interior Design - (Grade Level 10-12)
This course focuses on personal and family housing needs/issues emphasizing competencies related to housing needs and options, housing trends, selection, furnishings and appliances, energy conservation, and jobs and career in housing and interior design.
Lodging Management I - (Grade Level 11-12) - Certificate Course
Lodging Management II - (Grade Level 11-12) - Certificate Course
This two-year industry-based course focuses on industry orientation, careers, guest relations, professionalism, organization of hotels, reservations, the front office, housekeeping and security/safety. A required internship provides real-life work experience. Students who pass the national exam receive a nationally-recognized certification and become eligible for a scholarship from the American Hotel Lodging Association. Students may also participate in state and national competitions focusing on course knowledge and hands-on skills.
MEDICAL PROFESSIONS/CERTIFIED NURSING ASSISTANT (CNA)
Program Overview
Health Sciences offer expanding career opportunities in response to the growing needs of a rapidly aging population. The curriculum includes CPR and first aid certification, general health and certified nursing assistant (CNA), and first responder certification. Through job shadowing visits to auto repair businesses, students observe daily repair methods and techniques and gain real-world insight into professional operations and career opportunities. Job shadowing visits to hospitals and other health-related facilities provide insight and first-hand experiences in how the real world operates, and a tour to the Arkansas Country Doctor Museum provides an overview of medicine and its impact on the rural communities of America during the 1800s and early1900s. Career opportunities include certified nursing assistant, emergency medical technician, nursing, physical therapy, occupational therapy, medicine, dentistry, veterinary medicine, nutrition and dietetics.
COURSE OFFERINGS:
Medical Terminology (10, 11, 12)
This course gives an overview of medical terms and their root words, prefixes, suffixes, and combining forms, emphasizing pronunciation, spelling, drawings, diagrams and definitions to relate to human anatomy and physiology.
Introduction to Medical Professions (10, 11, 12)
This course provides basic information and skills for careers in a health care field. Topics include student organizations with parliamentary procedure, medical history, health care systems, qualities of a health care worker, communication and job seeking skills, and legal and ethical issues.
Medical Procedures (10, 11, 12)
Prerequisite: Introduction to Medical Professions. Students develop specific health care competencies in safety, infection control, vital signs, nurse assistant skills, medical office assistant skills, physical therapy skills, charting and abbreviations.
Medical Professions: Career Specialization- CNA (12)
Prerequisite: Introduction to Medical Professions, Medical Procedures, and Medical Terminology. This course offers Certified Nurse Assistant (CNA) certification and provides clinical training in area health care facilities.
Anatomy and Physiology (10, 11, 12) 18 Weeks, 1 Unit- Core Course
Prerequisite: Introduction to Medical Professions and Medical Terminology.
This course focuses on anatomical/physiological systems of the body as well as the disease process of those systems and advanced medical terminology.
MEDICAL PROFESSIONS/DENTAL ASSISTING
Program Overview
Dentistry, a sub specialty of medical professions, includes many disciplines and specialties. The public’s increased awareness of dental health insures many employment opportunities. The joint Fayetteville Youth Dental Program and the Dental Assisting Program helps train students in basic dental sciences and offers much needed dental care to qualifying students by providing an average of $50,000 in free professional care each year. Job shadowing provides real-life observation of dental offices and labs in daily operation. Career Opportunities include chair side dental assistant, dental equipment technician, laboratory dental assistant, dental laboratory technician, office assistant, dental hygienist, dental sales representative, and dentist.
COURSE OFFERINGS:
Introduction to Medical Professions- Dental*
This course provides basic information and skills related to the dental field, including infection control, basic dental anatomy and related materials. Students apply dental theory and skill through actual chair-side assisting with dentist and patient in the clinical setting.
Medical Procedures- Dental*
Building on skills learned in the introductory course, students develop familiarity and skills specific to the dental field, including safety, charting, abbreviations, and equipment.
Anatomy and Physiology-Dental*
This course emphasizes human anatomical and physiological systems with emphasis on head and neck anatomy. Students assess the disease process and its interconnected body systems through an expanded range of dental terminology.
Introduction to Medical Professions Extended-Dental*
This course continues practical application of dental theory and skill in the clinical setting through the study of infection control and radiology techniques.
Medical Procedures Extended-Dental*
This expanded study of dental procedures emphasizes restorative procedures, endodontic procedures, oral surgery, x-ray techniques, and laboratory procedures.
Medical Clinical Internship and Specialization-Dental
Students become involved at the clinical level in the routine maintenance of equipment, and in leadership through working with their fellow students. Students who qualify for the Apprenticeship Program may work in area dental offices.
(*indicates core classes needed for completer status)
PRE-ENGINEERING
Program Overview
The pre-engineering program has been developed by Project Lead the Way, a national program initiated in the 1980s to increase the number of students entering college engineering programs and successfully graduated. A multifaceted approach to rigorous college preparatory classes empowers secondary students to evaluate their interests and abilities in diverse areas of problem-solving, design and development of ideas, technical writing, research and communication. Students can participate in the national 6-week BEST robotics project to solve an engineering problem by developing and building a robot capable of performing specific tasks. College credit is available to those who meet rigorous curriculum and testing standards. Career opportunities include computer aided design, biotechnical engineering, mechanical engineering, civil engineering, electrical and computer engineering, engineering technology, and technology teacher.
COURSE OFFERINGS:
Foundation Courses:
Principles of Engineering
Introduction to Engineering Design
Digital Electronics
Specialization Courses:
Computer Integrated Manufacturing
Biotechnical Engineering
Civil Engineering and Architectural
Aerospace Engineering
Capstone Course: Engineering Design and Development
WELDING
Program Overview
The welding program prepares students to work in a wide variety of jobs in the welding profession. Students will gain an overview of the welding industry, safety and first aid, orientation, measurements, blue print reading, gas tungsten arc welding, gas metal arc welding, shielded metal arc welding and plasma arc cutting, as well as other areas of specialty. Students with certifications in structural and pipe welding enjoy great success in finding manufacturing and industry jobs as well as shop and field work. Job shadowing in business and industry provides real world exposure to welding applications and career options. Career opportunities include certified welder, pipe fitter, business owner, structural fabricator, and lead welder positions. .
COURSE OFFERINGS:
Gas Tungsten Arc Welding
This course demonstrates the uses of an arc between tungsten electrodes (non-consumable) and the weld pool, as used with shielding gas and withou the application of pressure.
Gas Metal Arc Welding
This course demonstrates the uses of an arc between a continuous filler metal electrode and the weld pool using shielding from an externally supplied gas and without the application of pressure.
Shielded Metal Arc Welding
Shielded metal arc welding is a cutting process that uses a covered electrode.
Oxyacetylene Cutting (OFC-A)
Oxyacetylene cutting is an oxyfuel cutting process variation using acetylene gas.
Plasma Arc Cutting (PAC)
Plasma arc cutting processes that use a constricted arc and remove the molten metal with a high velocity jet of ionized gas issuing from the constricting orifice.
Air Carbon Arc Cutting (CAC-A)
Air carbon arc cutting is a process variation that removes molten metal with a jet of air.
TECHNICAL STUDENT ORGANIZATION
SkillsUSA is a national organization of high school and college students and industry professionals in technical, skilled, service and health occupations. It enjoys strong supported from community, state, and national leaders in industry because they recognize the need for developing future leaders. Students receive advice and information from experienced adults in the business world through speakers, tours, contests and other activities that promote leadership, teamwork, citizenship, and character development.
The association works to build and reinforce self-confidence, positive work attitudes and strong communication skills by emphasizing a total quality work ethic and life-long education and pride in the dignity of work. Students learn to accept responsibility through a better undertanding of the free enterprise system and involvement in community service activities. Opportunities to compete in local, state, and national competitions and for elected offices provide students with the real-world experience needed to be successful in their chosen professions.